Residential Standard Installation

The installation of your DirecTV_® or Dish Network_® System typically includes:

   Mounting of your satellite dish on an outside wall or roof with the necessary hardware, within 125 ft. cable length of your TV. A certified installer will ensure placement of the satellite dish antenna for optimal reception and use high-quality cables, wires, and connectors.

   Up to 125 ft. of RG-6 cable or up to 250 ft. for dual tuner receivers that require two cables

   Routing of all cables to one TV (multiple TVs with purchase of multiple receivers installation) either through an exterior wall (frame or one layer of masonry) or from your basement and connection to an existing phone jack within 25 ft. (connection to a phone line is required for DirecTV System activation; if multiple receivers installation, all receivers must be hooked to the same phone line)

   Connection to your TV and VCR, if collocated, and activation of DirecTV programming

   Installation includes proper grounding of the system, activation, and testing the system.

Residential Custom Installation

Custom Installation is available at an additional charge. Custom installation typically includes:

   Additional RG-6 cable over 125 ft. or over 250 ft. for dual tuner receivers (TiVo for example) that require two cables

   Routing cables through more than one wall or wall fish

   Installation of phone line, if necessary or wiring of phone jack in excess of 25 ft.; providing enhancements to your phone line.

   Hookups to stereo and/or various components (not including VCR)